GYCFHTY Air-Blown Micro Cable
Blow fiber later, decide capacity when subscribers arrive.
Request a Quote
GYCFHTY — Air-Blown Loose-Tube Micro Cable
Built to be air-blown into 10/8 mm microduct after the duct is already in the ground. Lay the duct first, add cable when subscribers arrive, and scale up to 288 fibers — without reopening the trench.
- 12–288 fibers
- Air-blown into microduct
- IEC 60794-5 compliant
- 500–1,500 m per blow
Capacity on demand
Micro profile
Slim cable sized for 10/8 mm microduct.
Blown install
Air-blown — no pulling, less duct stress.
Scalable
Start lean, grow to 288 fibers as demand arrives.
Trench-saving
Duct in once; add cable later, no re-excavation.
Loose micro tubes
Multiple micro tubes with aramid.
Long sections
500–1,500 m per blow.
Technical data
| Construction | |
|---|---|
| Standards | IEC 60794-5 |
| Fiber count | 12 – 288 |
| Tubes | Micro loose tubes |
| Reinforcement | Aramid yarn |
| Sheath | Thin PE |
| Installation | |
| Method | Air-blown into microduct |
| Typical blow | 500 – 1,500 m |
| Duct | 10/8 mm microduct |
| Performance | |
| Application | Scalable duct networks |
| Water blocking | Water-blocking yarn |
Cut-away illustrative, not to scale. Blow lengths depend on duct layout; confirm at design stage.
Where it fits
Feeder routes
Neighborhood and access feeder spans from the central office.
Distribution & drop
Subscriber and distribution runs close to the home.
Scalable builds
Grow fiber capacity without new civil work.
Plan a microduct network
Send the duct plan and target fiber count — we match the micro cable.
Request a Quotesales@fzintellitech.com